Hallberg-Rassy 352

• The beautifully built interior Joinery is mahogany finished with rubbed effect varnish.
• The solid laminate hull is lined with varnished mahogany slats to provide an air barrier and ventilation to lockers and behind soft furnishing.
• Durable upholstery quality fabric in blue throughout all Upholstery including foam was replaced in 2016. Sole boards in varnished teak and holly faced marine ply.

The accommodation, from forward:

• Forward cabin with two comfortable berths.
• Length of berths 2,05 m (6’8”).
• Filler between berths.
• Stowage below berths and in lockers and shelves above.
• Opening deck hatch and one fixed ventilator on the foredeck
• A door separates the forward cabin from the passage to the main cabin.
• On SB side of the passageway two good sized hanging lockers.
• On port side an unusually roomy heads compartment with Jabsco marine head and holding tank.
• Washbasin in china, sunk into the countertop.
• Stowage above and below, Mirror.
• The floor is made as a shower stall with teak grating over a drained sump.
• Opening skylight. Headroom 1,85m(6’).
• The main cabin is built with straight settee/berth to stbd.
• Port side sofa is "L" shaped to form seating on two sides of a large (37”x4’), centre line, folding leaf saloon table.
• Fusion MS-RA70N with Blue Tooth connectivity
• Both Settee/ berths are 2m (6’6”) with lifting backrests to give extra width. 
• Bookshelves and lockers behind seating stowage under.
• Deckhead is ivory vinyl panels with mahogany inlays.
• Opening skylight.
• Fitted carpet throughout, New 2024
• Headroom in main cabin 1.89 m (6’3”). 
• Aft in the main cabin is a U-shaped galley equipped with a 2-burner stove with oven in gimbals. No current gas certificate.
• Permanent tubing with a shut-off valve for liquid gas from gas bottle.
• Compressor cooled 80ltr icebox. Stainless double sink 24”x14” with hot/cold freshwater faucet.
• The surface of countertops in the galley in an easily cleaned Formica finish.
• Locker for crockery.
• Waste basket, drawers, etc.
• Opposite the galley on the port side is the Chart Table with chart locker, drawers, electric switch panel with voltage, fresh water and fuel tank meters.
• In the passageway to the aft cabin, there is a workbench with lockers above and below.
• Large hanging locker for oilskins, boot locker below companionway ladder.
• Drawers in aft cabin. Lockers and shelves above berths.
• Hanging locker on the port side of the cabin. two ports in the hull and opening deck hatch above berths
• Carpeted throughout
• Curtains in all windows.
• Four 12 V outlets in head compartment, Saloon, galley, aft cabin and cockpit.
• The cockpit is self-draining with seats and gratings in teak.
• Deck stowage and large cockpit locker, (1.2 m² + 3.4 sqft).
• Stowage for winch handles etc.
• Anchor locker aft on deck.

Volvo Penta 2003T fresh water cooled marine diesel engine, refurbished 2023
Engine hours approx 3385 October 2024
Racor Primary fuel filter
Fuel polishing System
Main fuel tank cleaned 2023, secondary tank O/S, requires cleaning
Shaft drive with rope cutter
3-blade fixed propeller
Cutlass bearing renewed 2021
Eberspacher diesel fired warm air/water heating system, New 2023
Hot water calorifier 40l, New 2023
Two 110Ah leisure batteries for domestic systems
Separate 90Ah Engine start battery, New 2024
Sterling Battery charger
1800W Sterling Invertor with Saloon socket, New 2021
DC:DC Sterling battery charger, New 2021
220v shore power inlet for charger, calorifier and 220v socket in saloon.
150W solar Panel, New 2021 mounted on arch for charging domestic battery via MPPT regulator.
50W solar panel on deck for charging engine battery via MTTP regulator
Electric bilge pump, New 2024
Manual Bilge Pump
Jabsco Fresh Water accumulator tank, New 2023

Manual bilge pump

Spars and rigging from Seldén Mast AB.
Standing Rigging renewed 2013
Mast and boom made from silver anodized aluminium alloy with one set of spreaders.
Halyard winches: Two Lewmar 16ST, reef winch Lewmar 7C.
Slab reefing system (2 reef Lines) + outhaul.
Rope kicker.

Sails

Hood cross-cut mainsail in Dacron, condition - serviceable/fair
Hood cross-cut jib in Dacron, condition - serviceable/fair
Kemp Cruising chute with snuffler, condition - good/excellent
Spare 120% cross-cut Dacron Genoa also available

2 Lewmar 43CST 2-speed Primary winches
Four 12 “ mooring cleats forward and aft.
Two 10” mooring cleats amidships.
Pulpit in stainless steel.
Built in rubbing strake with bronze profile.
Double lifelines with four pairs of conical stanchions. Height 26 “.
Permanent wind screens with hardened glass in light alloy frame with opening centre section.
2x 12v Swedish style sockets under windscreen centre section.
Canvas sprayhood, New 2022
Cockpit cover.
Cockpit cushions, New 2022
Cockpit table
Steering pedestal with Steering compass
Leather covered steering wheel
Emergency Tiller
Portlights in 9 mm acrylic glass and light alloy frames.
Electric windlass with remote for lowering acnchor
20kg CQR anchor 
60m galvanised chain, New 2021
10kg Danforth anchor with 40m chain in aft locker
LED navigation lights excl Steaming light and deck flood light
Bathing ladder on transom.
2x winch handles
Spare CampingGaz bottle
Various warps
6x large fenders
5x small white fenders

AMANDA has a complete and integrated suite of B & G instruments inc Fusion Stereo, installed between 2021 and 2023.
 
B & G Vulcan chart plotter, New 2022
3x B & G Triton 2 displays, New 2022
B & G Autopilot NAC 2. New 2022
B & G RF25N Rudder feedback, New 2022
B & G Auto pilot Drive unit, New 2022
B & G WSG 320 Bluetooth Wind Instrument, New 2022
B & G V60B AIS Transceiver, New 2023
B & G Flux Gate compass, New 2021
Standard Horizon Eclipse VHF, no MMSI
B & G V60-B VHF with antenna and cable, requires installation, New and Boxed.

• Hull moulded in solid laminate throughout with cored frames and stringers and structural engine bearers.
• Encapsulated ballast, fin keel and full-length skeg to the rudder.
• GRP-sandwich construction deck moulding, 25 mm with polyvinyl closed-cell foam as core material for strength and insulation.
• The hull and deck are completely joined by overlapping GRP laminate prior to fit out leaving every part of the yacht accessible for service and replacements in later life.
• Bulwark formed in the deck and hull mouldings and fitted with a solid capping in teak.
• Handrails, companionway, hatchguides, sole and seats in cockpit are all in Bangkok-teak.
• Laid teak deck on top of GRP deck, originally 12mm
• The deck is provided with four 1” scuppers draining below the waterline.
• Two 11/2’ scuppers from the watertight and self-draining cockpit.
• Coppercoat Antifouling

All safety equipment is supplied on a 'sold as seen' bases. Transworld Yachts offer no guarantees or warranties with the listed safety equipment. Transworld Yachts recommend all safety equipment is inspected and/or tested by a subtilty qualified technician before use.

Fire extinguishers x2
Jackstays
Wooden Bungs
Fire blanket
Baltic Horseshoe
Crewsaver Rescue Sling

Transworld Yachts offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.